Suggested
List Price: $ $416
Powers Productions Discount
Price: $405 |
Skutch CK-4 The
CK-4 phone line simulator is our Four Phone Line Simulator with
auto ring up. This unit simulates four, individual, standard
telephone company lines, DID lines and PP lines. This unit allows
your Voice Cards to be used as information systems at malls, hotels,
or even trade shows; and lets you to demonstrate Voice
systems on a multi-line level.
This unit gives you maximum connection flexibility. It connects easily to all industry standard single and dual line
phones, Voice Cards and PP Cards, and operates on standard 110VAC
power.
The CK-4 unit offers several significant improvements from the AS-66,
including independent Phone. PP and Voice Card power loops that
give your equipment maximum power, external option switches
for changing operating modes, increased cross-talk immunity
to keep your conversations separate, LED indicators for each
channel to let you know what is going on, and both single and
dual line jacks for the Phones, PP, and the Voice Cards so you won't
need to mess with jack splitters/combiners to connect your equipment.
To operate, take a telephone OFF HOOK and the CK-4 phone line
simulator will automatically activate and connect you to the
Voice Card. Once connected, you will have talk battery and you
will be able to use the touch tones on your telephone for control
codes as needed. When you finish, just hang up the telephone and
the CK-4 phone line simulator will immediately disconnect the
Voice Card by giving it a CPC, PP or WINK disconnect signal. Each
line is completely separated from the others, and each telephone
will be routed directly to the corresponding VOICE CARD port.
The following is a list of the channel specifications of the
CK-4 phone line simulator:
Cross Talk between channels
= -120db
AC hum level = -65dbm
Audio Loss per channel = -5.15db
|
Additional
Information:
• Introduction
The CK-4 is our four-channel telephone line simulator with auto
ring up. This unit simulates four, individual, standard telephone
company lines and also DID lines (suffix digits not sent). This
unit allows Voice Cards to be used as information systems at
malls, hotels, or even trade shows; and it allows you to demonstrate
Voice systems on a multi-line level.
• Installation
Just connect single line phones to the jacks labeled Phone Channels
1, 2, 3 and 4 (or for 2 line phones, use the 1&2 and 3&4
jacks). The jacks labeled Voice Card (Ring Up) Channels 1, 2,
3 and 4 connect to single line voice cards (or use the 1&2,
3&4 jacks to connect to 2 line voice cards). The unit operates
on standard 110VAC house power.
• Operation
Simply take a phone channel "OFF HOOK" and the CK-4
will automatically connect you to the assigned Voice Card Channel;
i.e. Phone 1 to Voice Card 1, Phone 2 to Voice Card 2, etc.
Once connected, you will have talk battery and you will be able
to use the touch tones on your phone for control codes as needed.
When you finish, hang up the phone and the CK-4 will immediately
disconnect the Voice Card by giving it a "PP" "CPC" or
"WINK" disconnect signal. Each line is completely
separated from the others, and each phone will be routed directly
to the corresponding VOICE CARD channel. If the Voice Card goes
“ON HOOK”, while the Phone is still “OFF HOOK”,
then you will get a Reorder signal to let you know the phone
needs to go “ON HOOK”. The Channel lights will show
the following:
| Steady |
Phone is “Off Hook” |
| Fast Flash |
Voice Card is “Ringing” |
| Slow Flash |
Phone is connected to Voice Card |
| Medium Flash |
“Reorder” signal - Voice
Card has “Hung Up” |
|
|
|
| . |
|
|
